The SENIS® SENCS1D02 is a programmable current sensor that uses a combination of linear Hall Sensor and Coil to increase the measurement bandwidth and to improve the signal-to-noise ratio, i.e. to increase resolution. This combination allows the highest frequency bandwidth of this kind of sensor on the market. The sensor provides and analog output voltage proportional to the applied magnetic field density. The transfer characteristic of the sensor is factory trimmed over temperature and is programmable (offset, sensitivity, filtering...) during end-of-line customer calibration beyond
the default factory trimming. In a typical current sensing application, the sensor is used in a combination with a ring shaped soft ferromagnetic core. This core is recommended to be ferrite or laminated for high bandwidth applications.
Electroverge® will be stocking both the SENCS1Dx Current Sensor ICs as well as the application's specific evaluation boards and kits. Stock available for 10mT, 100mT ranges, and Xand Z sensitivity direction in SIP4 packages.
